LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2009 >> Routan S >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> System >> Update Programming, Mil On, P013A O2 Sensor Slow Response, Rich To Lean Condition (GROUP 01, NO. 10-02)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Update Programming, Mil On, P013A O2 Sensor Slow Response, Rich To Lean Condition (GROUP 01, NO. 10-02)

Publication date: 2010-02-10
Reference number: GROUP 01, NO. 10-02
Supersedes refnos: 2022613

UPDATE PROGRAMMING, MIL ON, P013A O2 SENSOR SLOW RESPONSE, RICH TO LEAN CONDITION

UPDATE PROGRAMMING, MIL ON, P013A O2 SENSOR SLOW RESPONSE, RICH TO LEAN CONDITION

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 01, NO. 10-02 (2022613), Date of Issue:  February 10, 2010
VOLKSWAGEN: Routan 2009-2010
GROUP: 01 - On-Board Diagnostic

SERVICE INFORMATION

APPLICABLE MODELS AND YEARS

Model(s) Year Eng. Code Trans. Code VIN Range From VIN Range To
Routan 2009-2010 CGUA All 41_9R000001 D1_AR195846

CONDITION

01 10 02  February 10, 2010 2022613 

DIAGNOSTIC TROUBLE CODES

Fault Code Description
P013A O2 Sensor 1/2 Slow Response - Rich To Lean

TECHNICAL BACKGROUND

Update programming of the Powertrain Control Module (PCM) with improved software to correct the DTC P013A.

Tip:

PRODUCTION SOLUTION

Improved PCM software has been introduced in production as of November 26, 2009.

SERVICE

Update programming of the Powertrain Control Module (PCM) with new software. 

DIAGNOSIS

Using a StarMOBILE with ElsaWeb and the appropriate Diagnostic Procedures, verify all engine systems are functioning as designed. If DTC's are present, record them on the repair order and repair as necessary before  proceeding with this bulletin. If the customer describes the Symptom/Condition, or it can be reproduced, perform the Repair Procedure.

REPAIR PROCEDURE

NOTE: If this flash process is interrupted/aborted, the flash should be restarted.
  1. Reprogram the Powertrain Control Module using the StarMOBILE with the latest software.
  2. After PCM reprogramming, the following must be performed:
    • Clear any DTC's that may have been set in other modules due to reprogramming.
    • Clear the Variable Line Pressure (VLP) Counters, found in the Misc. Function menu for the PCM/ECU.
    • Perform the Quick Learn function, found in the Misc. Function menu for the PCM/ECU.

WARRANTY

WARRANTY INFORMATION

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual (1)
Model(s) Year(s) Eng. Code(s) Trans. Code(s) VIN Range From VIN Range To
Routan 2009, 2010 3.8L CGUA All 41_9R000001 D1_AR195846
Claim Type: Use applicable Claim Type (1)
SAGA Coding 
Service Number: Damage Code HST Damage Location (Depends on Service No.) Parts Manufacturer (removed part)
2470 0039 CWM2022613 Use applicable when indicated in ElsaWeb (L/R) U S M (2)
Labor Operation (3) : Program Powertrain Control Module 24702599 = 40 TU
Diagnostic Time (4)
GFF Time expenditure 01500000 = 00 TU max. NO
Road Test 01210002 & 01210004 NO
Technical Diagnosis 0132xxxx = 00 TU max. NO
Claim Comment: Input "As per Technical Bulletin 2022613" in comment section of Warranty Claim.
(1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
(2) Code per warranty vendor code policy.
(3) Labor Time Units (TUs) are subject to change with ELSA updates.
(4) Documentation required per Warranty Policy & Procedures Manual.

REQUIRED PARTS AND TOOLS

TOOL INFORMATION

Tool Description Tool No:
Midtronics Battery Tester/Charger InCharge 940 (INC 940)
StarMOBILE Tester Kit CH9401
(Software level 10.01.23 or higher)

ADDITIONAL INFORMATION

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.