Left Engine Mount/Bracket: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, and 2011 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the left transmission mount onto the vehicle. Tighten bolts (1 and 3) to 50 Nm (37 ft. lbs.).

Fig 1: Identifying Left Transmission Mount Isolator With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lower the vehicle.

-- Install the PCM. Refer to POWERTRAIN CONTROL MODULE .

-- Install the two transmission mount to transmission bolts (1). Tighten bolts (1) to 100 Nm (74 ft. lbs.).

Fig 2: Identifying Transmission Mount To Transmission Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the floor jack.

-- Install the front fore and aft crossmember. Refer to Removal and Installation .

-- Lower the vehicle.

-- Install the air cleaner body housing. Refer to AIR CLEANER HOUSING .

-- Connect the negative battery cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .