Left VVT Solenoid: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, and 2011 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the variable valve timing solenoid seals (1). The seals can be reused if not damaged.

Fig 1: Identifying Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Refer to the markings made at disassembly and install the intake variable valve timing solenoid (4) and the exhaust variable valve timing solenoid (2) in their original locations.

Fig 2: Identifying Valve Timizng Solenoids

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the variable valve timing solenoid mounting bolts (3) and tighten to 4 Nm (35 in. lbs.).

-- Connect the electrical connector (1) to the variable valve timing solenoid.

-- Connect the negative battery cable. Refer to Battery, Disconnecting And Connecting .

NOTE:

The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.