3.8L - MULTIPORT Fuel Injection - Engine Code: CGUA

• 24 MULTIPORT Fuel Injection
  • General Information
    • Intake Manifold Leaks
    • Intake Manifold Inspection
    • Upper Intake Manifold Stripped Thread Repair
    • Upper Intake Manifold Vacuum Port Repair
  • Description And Operation
    • Fuel Injection Modes Of Operation
      • Notes
      • Ignition Switch On (Zero Rpm) Mode
      • Engine Start Up Mode
      • Engine Warm Up Mode
      • Cruise Or Idle Mode
      • Acceleration Mode
      • Deceleration Mode
      • Wide-Open-Throttle Mode
      • Ignition Switch Off Mode
    • Fuel Injection Correction Or Adaptive Memories
    • Fuel Injection System
    • Intake Manifold
    • Positive Crankcase Ventilation Valve
    • On-Board Refuel Vapor Recovery
    • Evaporative System Integrity Monitor
    • Powertrain Control Module
  • Specifications
    • Fastener Tightening Specifications
    • Fastener Tightening Specifications, Repaired Upper Intake Manifold
  • Removal And Installation
    • Air Filter Element
      • Removing
      • Installing
    • Air Cleaner Housing
      • Removing
      • Installing
    • Intake Air Temperature Sensor
      • Removing
      • Installing
    • Throttle Body
      • Removing
      • Installing
    • Throttle Position Sensor
    • Positive Crankcase Ventilation Valve
      • Removing
      • Installing
    • Manifold Absolute Pressure Sensor
      • Notes
      • Removing
      • Installing
    • Short Runner Valve Solenoid
      • Removing
      • Installing
    • EVAP Purge Solenoid
      • Removing
      • Installing
    • Upper Intake Manifold
      • Removing
      • Installing
    • Lower Intake Manifold
      • Removing
      • Installing
    • Crankshaft Position Sensor
      • Removing
      • Installing
    • Oxygen Sensor, Bank 1 Sensor 1
      • Removing
      • Installing
    • Oxygen Sensor, Bank 1 Sensor 2
      • Removing
      • Installing
    • EVAP Canister
      • Removing
      • Installing
    • EVAP Canister Filter
      • Removing
      • Installing
    • Evaporative System Monitor Switch
      • Removing
      • Installing
    • Powertrain Control Module
      • Removing
      • Installing