Instrument panel, securing points
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Cabrio, and 1998 Volkswagen Cabrio. However, it is still accessible from the selected car via links, so may be relevant.
- Remove screws (11 with glove box)
- Remove nuts -1- (nuts are located in plenum chamber).
- Pull instrument panel off carrier slightly and disconnect wiring harness from instrument panel.
- Remove instrument panel from vehicle.
NOTE:
Ensure washers -2- are installed when installing instrument panel. The following list refers to items in Fig 1
.
- - Nut
- - Sealing washer
- - Bulkhead
- - Instrument panel carrier