Removal And Installation: Transmission: Notes
WARNING: This page is about a different car, the 2008 Volkswagen Passat, 2007 Volkswagen Passat, and 2006 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Adapter VW 771/40 from Slide Hammer-Complete Set VW 771
- Engine Support Bridge 10-222 A
- Engine Support Feet 10-222 A/8
- Hose Clamps up to 25 mm Dia. 3094
- Transmission Support 3282
- Transmission Support Elements (Pin 3289/29) (determine when mounting the adjustment plate on the transmission support)
- Adjustment Plate 3282/33
- Transmission Support Jig 3336
- Torque Wrench (5-50 Nm) V.A.G 1331
- Torque Wrench (40-200 Nm) V.A.G 1332
- Engine/Transmission Jack V.A.G 1383 A
- Grease for Clutch Plate Splines G 000 100
- M10 x 20 Bolt