High Beams As Assisting Driving Light, Adapting
WARNING: This page is about a different car, the 2010 Volkswagen Passat, 2009 Volkswagen Passat, 2008 Volkswagen Passat, 2007 Volkswagen Passat, and 2006 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnosis, Testing and Information System VAS5051B
NOTE:
With automatic headlamps or automatic headlamp control switched on, light is automatically switched on or off via a light or rain sensor.
Additional information:
Refer to the Owner's Manual.
On the Assisting Driving Light, high beams can be switched on or off.
-- Connect the VAS5051B.
-- On the VAS5051B, select "Guided Fault Finding".
-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Electrical Equipment
- 01 - OBD capable systems
- Vehicle Electrical System Control Module
- Functions
- Adapting high beams as assisting driving light