Fastener Tightening Specifications
WARNING: This page is about a different car, the 2011 Volkswagen Eos, 2010 Volkswagen Eos, 2009 Volkswagen Eos, 2008 Volkswagen Eos, and 2007 Volkswagen Eos. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Bolt Size | Nm |
|---|---|---|
| ABS Control Module1 | - | 5.5 |
| ABS Control Module (ABS Mark 60, from Calendar Week 22.2008)1 | - | 2 + 0.8 |
| ABS wheel speed sensor | - | 8 |
| Bracket for ABS Hydraulic Unit | - | 8 |
| Bracket for Heat Shield (ABS Mark 60, from Calendar Week 22.2008) | - | 20 |
| Brake Master Cylinder, Nut1 | - | 25 |
| Heat Shield1 | - | 25 |
| Heat Shield (ABS Mark 60, from Calendar Week 22.2008) | - | 8 |
|
||
ABS Mark 70 (ABS/ASR)
| Tightening specifications: | |
|---|---|
Control module to ABS hydraulic unit
|
5.5 Nm |
| Hydraulic unit hex bolt to bracket | 8 Nm |
| Brake lines at ABS aggregate: | |
| Thread M 10 x 1 | 14 Nm |
| Thread M 12 x 1 | 14 Nm |
ABS Mark 60, ABS, EDL, ASR and ESP, through Calendar Week 22.2008
| Tightening specifications: | |
|---|---|
Control module to ABS hydraulic unit
|
5.5 Nm |
| Hydraulic unit hex bolt to bracket | 8 Nm |
| Brake lines at ABS aggregate: | |
| Thread M 10 x 1 | 14 Nm |
| Thread M 12 x 1 | 14 Nm |
ABS Mark 60, ABS, EDL, ASR and ESP, from Calendar Week 22.2008
| Tightening specifications: | |
|---|---|
Control module to ABS hydraulic unit
|
2 Nm + 0.8 Nm |
| Torx bolt for the hydraulic unit to the retainer | 8 Nm |
| Hex bolt, retainer to bracket | 8 Nm |
| Brake lines at ABS aggregate: | |
| Thread M 10 x 1 | 14 Nm |
| Thread M 12 x 1 | 14 Nm |