Special Tools

WARNING: This page is about a different car, the 2008 Volkswagen Passat, 2007 Volkswagen Passat, and 2006 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Support Bridge 10-222 A
Engine Support Feet 10-222 A/8
Hose Clamps up to 25 mm Dia. 3094
Transmission Support 3282
Sleeve 3160
Bracket 30-211A
Thrust Piece T10042
Thrust Piece T40008
Hot Air Blower V.A.G 1416
Extractor Lever VW 681
Thrust Piece T10143
Press Tool for Shaft Seal T10180
Driving Sleeve VW 244B
Thrust Plate VW 401
Thrust Plate VW 402
Punch VW 407
Tube 37 mm Dia. VW 416 B
Guide Piece VW 436 A
Guide Pin VW 439
Holding Fixture VW 801
Guide Piece 10-15
Thrust Pad 3124
Punch VW 411
Tube Trans. Drive Shaft VW 426
Thrust Pad 16.5/28 mm Dia. VW 431
Triple Square Socket Driver 3357

Fig 1: 3357 Triple Square Socket Driver
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Connecting Pin T10027 A

Fig 2: Identifying Connecting Pin T10027 A
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Hose Clamp Pliers V.A.G 1275

Fig 3: Identifying Hose Clamp Pliers V.A.G 1275
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Special Hook 3370

Fig 4: Front End Hook VAS 3370
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Sleeve VW 423

Fig 5: Identifying Sleeve VW 423
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Extractor Lever T20143/1

Fig 6: Extractor Hook T20143
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Thrust Block T10083

Fig 7: Identifying Pressing Support T10083
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Drift T10169 or T10362

Fig 8: Identifying Drift T10362
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Socket and Extended Bit T10107 or T10107 A

Fig 9: Identifying Multi-Point Socket T10107 A
Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required

-1- Kukko Extractor 14.5-18.5 mm 21/2
-1- Kukko Extractor 23.5-30 mm 21/4
-1- Kukko Puller 12-14.5 mm 21/1
-1- Kukko Extractor 18.5-23.5 mm 21/3
-3- Kukko Separating Tool 5-60 mm 17/0
-4- Kukko Support 22/2
-4- Kukko Support 22/1

Fig 10: Identifying Kukko Tools
Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 11: Identifying Special Tools -- Transmission (Eos), Removing And Installing (2 Of 2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required

Transmission Support Elements (Pin 3289/29) (determine when mounting the adjustment plate on the transmission support)
Adjustment Plate 3282/33
Transmission Support Jig 3336
Torque Wrench (5-50 Nm) V.A.G 1331
Torque Wrench (40-200 Nm) V.A.G 1332
Engine/Transmission Jack V.A.G 1383 A

Fig 12: Identifying Special Tools -- Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts (Pinion Shafts), Differential And Selector Rods, Removing And Installing (1 Of 2)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required

Holding Plate VW 309
Holding Fixture VW 313
Transmission Support VW 353
Thrust Tube VW 455
Slide Hammer-Complete Set VW 771
Sleeve 30-21