LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2009 >> GLI 2.0 A, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Air Conditioning) >> 87 Air Conditioning >> Description And Operation >> CLIMATRONIC A/C System With Automatic Controls >> CLIMATRONIC Control Module, From 08 November 2010
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CLIMATRONIC Control Module, From 08 November 2010

WARNING: This page is about a different car, the 2011 Volkswagen Eos, 2010 Volkswagen Eos, 2009 Volkswagen Eos, 2008 Volkswagen Eos, and 2007 Volkswagen Eos. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Not all the buttons are used, depending on the vehicle equipment level.

Fig 1: Identifying Climatronic Control Module, From 08 November 2010
GWWN87-10776Courtesy of VOLKSWAGEN UNITED STATES, INC.
  1. Max Defrost button 
    • The control module will be activated in such a way so that the windshield will defrost quickly when the Max Defrost button is pushed.
  2. AUTO Button 
    • In automatic mode the Climatronic maintains the selected vehicle temperature automatically. The air temperature, the blower speed and the air distribution are adjusted automatically.
    • LED is on when the setting is active.
    • Pressing the button several times increases the blower speed when using AUTO  . The second LED turns on.
  3. Windshield Air Distribution Button 
    • LED is on when the setting is active.
  4. Heated Windshield Button 
    • LED is on when the setting is active.
  5. Center Air Distribution Button 
    • LED is on when the setting is active.
  6. Lower Air Distribution Button 
    • LED is on when the setting is active.
  7. Immediate Heating Button -E537- 
    • LED is on when the setting is active.
  8. Air Recirculation Button 
    • Press the button for recirculating air function to prevent polluted air from entering interior.
      NOTE:

      Recirculating air is switched on automatically under the following conditions:

      When the windshield washer system is operated.

      When Air quality sensor -G238- is activated.

      When the reverse gear is engaged (this function is only active for 2 minutes after the engine is started).

      Blower speeds on Front A/C display control head -E87-.

      Front A/C display control head -E87- "OFF"

  9. AC Button 
    • If the AC  button is deactivated, the A/C compressor is set to almost zero delivery. If the AUTO  button is activated, the heating and ventilation mode continues to be controlled electronically.
  10. Rear Window Defogger Button 
    • Rear window defroster remains on for 4 to 20 minutes, depending on exterior temperature.
    • LED is on when the setting is active.
  11. Right Temperature Control Knob 
    • The selected temperature will be illuminated.
  12. Button For The Right Seat Heating 
    • The seat heating as 3 settings. An LED indicates which setting is selected.
    • If no LED is illuminated, the seat heater is switched off.
  13. Air Conditioning Synchronization Button 
    • This button transfers all driver air conditioning settings to the other seats.
  14. Button For Increasing The Blower Speed 
  15. REST Button 
    • When residual heat function is switched on the residual heat of engine is pumped by a coolant pump to the heater core.
  16. Blower Speed Display 
    • The selected speed is illuminated.
    • In automatic operation the actual blower speed is displayed.
  17. REAR Button 
    • Press the REAR  button to set the Rear A/C display control head -E265-.
  18. Button For Decrease The Blower Speed 
  19. OFF Button 
    • Press the OFF  button to turn off the heater and A/C.
  20. Left Temperature Control Knob 
    • The selected temperature will be illuminated.
  21. Button For Left Seat Heating 
    • The seat heating as 3 settings. An LED indicates which setting is selected.
    • If no LED is illuminated, the seat heater is switched off.
scientia non olet · About LEMON Manuals