Update Programming, Gateway Control Module, Incorrect Seat Memory Adjustment (GROUP 72, NO. 10-02)

Publication date: 2010-08-18
Reference number: GROUP 72, NO. 10-02
Supersedes refnos: 2023213

UPDATE PROGRAMMING, GATEWAY CONTROL MODULE, INCORRECT SEAT MEMORY ADJUSTMENT

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 72, NO. 10-02 (2023213), Date of Issue: August 18, 2010

VOLKSWAGEN:	Tiguan, Jetta, Passat, Passat Wagon, CC - 2009-2010; Jetta SportWagen, Golf Wagon - 2010
GROUP:	72 - Seat - Frame, Spring Core

APPLICABLE MODELS AND YEARS

Model(s)	Year	Eng. Code	Trans. Code	VIN Range From	VIN Range To
Tiguan, Jetta, Passat, Passat Wagon, CC	2009 - 2010	All	All	All	All
Jetta SportWagen, Golf Wagon	2010	All	All	All	All

CONDITION

72 10 02 August 18, 2010 2023213

Update Programming, Gateway Control Module, Incorrect Seat Memory Adjustment

The seat memory does not move to the pre-set position after opening the door.

TECHNICAL BACKGROUND

Incorrect software in the diagnosis interface (Gateway control module).

PRODUCTION SOLUTION

Software updated 2/2010.

SERVICE

UPDATE-PROGRAMMING PROCEDURE

Tip: To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".

The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.

NOTE: Prior to launching VAS-PC application and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Circular # VSE-08-18. Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure.
When using a VAS 5051B or VAS 5052A tester in conjunction with a VAS 5054A wireless transmitter head for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to do so may lead to errors during the flash procedure.

Update the Engine Control Module using the SVM Unit code as listed in the table below:

SOFTWARE INFORMATION

Passat / Passat Wagon / CC
Old Software Part No.	Old Software Version	New Software Part No.	New Software Version (or higher)	SVM Unit Code
3C0 907 530 P	170	3C0 907 530 P	172	332B
3C0 907 530 Q	170	3C0 907 530 Q	172	332B
3C0 907 530 N	170	3C0 907 530 N	172	332B
Jetta/Tiguan/Jetta SportWagen/Golf Wagon
1K0 907 530 AA 1K0 907 530 AD	0081 0110 0111	1K0 907 530 AD	0012	332B
1K0 907 530 AB 1K0 907 530 AE	0081 0110 0111	1K0 907 530 AE	0012	332B
1K0 907 530 AA 1K0 907 530 AD	0220 0221 0222 5223 0230 0231 0232	1K0 907 530 AD	0233	332B
1K0 907 530 AC 1K0 907 530 AF	0220 0221 0222 5223 0230 0231 0232	1K0 907 530 AF	0233	332B
1K0 907 530 AF	0590 0591	1K0 907 530 AF	0592	332B

The procedure can be found in GFF under Functions/ Component Selection, Software Version Management, Adapting Software.

WARNING: Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury may result if contact is made with spinning fan blades.

Keep hands and all objects away from Radiator Fan(s) during Update Process!

Tip: The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried out that is not explicitly stated in the Technical Bulletin.

Ensure attached ECM/TCM Tuning Form has been completed and signed by customer as required in SVM Technical Bulletin Instance 2014603 .

WARRANTY

WARRANTY INFORMATION

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual ⁽¹⁾

Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN Range From

VIN Range To

Tiguan, Jetta, Passat, Passat Wagon, CC

2009-2010

All

Jetta SportWagen, Golf Wagon

2010

All

Claim Type:

Use applicable Claim Type ⁽¹⁾

SAGA Coding

Service Number:

Damage Code

HST

Damage Location (Depends on Service No.)

Parts Manufacturer (removed part)

7293

0039

Use applicable when indicated in ElsaWeb (L/R)

S J 8 ⁽²⁾

Labor Operation ⁽³⁾ : Program Gateway Control Module

7293 2599 = 20 TU

Labor Operation ⁽³⁾ : Charge Battery

2706 8950 = 10 TU

Diagnostic Time ⁽⁴⁾

GFF Time expenditure

01500000 = 00 TU max.

Road Test

01210002 & 01210004

Technical Diagnosis

0132xxxx = 00 TU max.

Claim Comment: Input "As per Technical Bulletin 2023213" in comment section of Warranty Claim.

⁽¹⁾	Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only

⁽²⁾	Code per warranty vendor code policy.

⁽³⁾	Labor Time Units (TUs) are subject to change with ELSA updates.

⁽⁴⁾	Documentation required per Warranty Policy & Procedures Manual.

REQUIRED PARTS AND TOOLS

No Special Parts required.

TOOL INFORMATION

Tool Description	Tool No:
Midtronics Battery Tester/Charger	InCharge 940 (INC-940)
VAS Diagnostic Tool	VAS 5051B, 5052/A, 6150 (Base CD V18.00 and Brand CD V18.01 or higher)

ADDITIONAL INFORMATION

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.