Engine, Removing: Notes
WARNING: This page is about a different car, the 2015 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After the high pressure line assembly, and when installing a new short engine, it is particularly important to tighten the fuel injector tensioning claw to the previously mentioned tightening specification, refer to OVERVIEW - FUEL INJECTORS . Only tighten the tensioning claws >>hand tight<< after delivery when assembling the high pressure line in order to align the fuel injector. Engine damage may occur if not observed.
Special tools and workshop equipment required
- Pry Lever 80-200
- Engine and Gearbox Jack VAS6931 or Engine/Gearbox Jack VAG1383A
- Step Ladder VAS5085
- Engine Bung Set VAS6122
- Shop Crane - Drip Tray VAS6208
- Hose Clip Pliers VAS6362
- Locking Pin T10060A
- Engine Support T10497 with Pins T10497/1
- Protective eyewear
- Protective gloves