Headlamp Range/Cornering Lamp Control Module J745

Headlamp Range/Cornering Lamp Control Module J745

- Remove the glove compartment.

- Disengage harness connector in - direction of arrow - and disconnect connector - 1 - from headlamp range/cornering lamp control module - 2 -.






- Remove the bolts - arrows - and the headlamp range/cornering lamp control module - 1 -.






Installing

Install in reverse order of removal. Note the following:

• After installing a new Headlamp Range/Cornering Lamp Control Module, the module must be coded. Refer to => [ Headlamp Range/Cornering Lamp Control Module J745, Coding ] Testing and Inspection and then headlamp basic setting must be performed. Refer to => Maintenance Procedures.

- Check headlamp for function.

- Check headlamp adjustment and adjust headlamp if necessary.