Parking Aid Control Module J446, from 05.08

Parking Aid Control Module J446, from 05.08

Coding the parking aid control module from 05.08

The parking aid control module is integrated in the parallel parking assistance control module (J791) and installed over the relay carrier in the driver footwell.

Removing

Coding the parking aid control module (J446) from 05.08

Via coding, the parking aid control module can be specifically adjusted to the demands of the vehicle at hand.

- Connect the Vehicle Diagnostic Tester. Refer to => [ Vehicle Diagnosis, Testing and Information Systems ] Vehicle Diagnosis, Testing and Information Systems.

- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

- Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Body repair procedures

• 01 - On Board Diagnostic (OBD) capable systems

• Parking Aid

• Parking assistance functions

• Coding parking aid system