Service Interval Display, Coding

-- Connect the vehicle diagnosis tester. Refer to VEHICLE DIAGNOSIS TESTER, CONNECTING .

-- Switch the ignition on.

-- Touch the GUIDED FUNCTIONs button/field on the screen.

NOTE:

If the displays indicated in the procedure are not shown on the display, refer to Operating Instructions for the Vehicle Diagnosis Tester

-- Select in succession:

-- Confirm vehicle identification.

If the vehicle identification procedure was performed correctly, press > button for confirmation.

-- Select in succession:

"Instrument cluster" -ARROW-

Fig 1: Identifying "Instrument Cluster" Selection On Scan Tool
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
"Adapt service interval extension".

-- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".

End Adaptation

Indicated on display:

Fig 2: Identifying "Go To" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the >>Go to<< button -arrow- on display.

Indicated on display:

Fig 3: Identifying "Exit" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press Exit button -arrow- on display.

-- Press Exit button in exit menu.

-- Turn off ignition and disconnect diagnostic connection.