Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | DISASSEMBLY AND ASSEMBLY REFRIGERANT R134A CAPACITIES |
||
| Torque | A/C REFRIGERANT COMPONENT SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| Front | 40 FRONT SUSPENSION | ||
| Rear | 42 REAR SUSPENSION | ||
| Battery | 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL | ||
| Brakes | |||
| Bleeding Sequence | BRAKE SYSTEM, BLEEDING | ||
| Disc Brakes | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS
BRAKES - MECHANICAL COMPONENTS SPECIFICATIONS BRAKES - HYDRAULIC COMPONENTS |
||
| Charging | |||
| Generator | NA | ||
| Torque | |||
| 2.0L | GENERATOR OVERVIEW [FOR ENGINE(S): BPY, CCTA, CBFA] |
||
| 2.5L | GENERATOR OVERVIEW [FOR ENGINE(S): BGP, BGQ, CBTA, CBUA] | ||
| Drive Belts | |||
| Adjustment & Belt Routing | |||
| 2.0L | RIBBED BELT
for BPY engines RIBBED BELT for CBFA & CCTA engines |
||
| 2.5L | RIBBED BELT | ||
| Engine Cooling | |||
| General Service Specifications | |||
| 2.0L | DRAINING AND FILLING
for BPY engines DRAINING AND FILLING for CBFA & CCTA engines |
||
| 2.5L | COOLANT, DRAINING AND FILLING | ||
| Radiator Cap Pressure | 1.4-1.6 Bar | ||
| Thermostat R & I | |||
| 2.0L | COOLANT THERMOSTAT
for CBFA & CCTA engines COOLANT THERMOSTAT HOUSING WITH THERMOSTAT for BPY engines |
||
| 2.5L | COOLANT THERMOSTAT | ||
| Water Pump R & I | |||
| 2.0L | COOLANT PUMP
for BPY engines COOLANT PUMP for CBFA & CCTA engines |
||
| 2.5L | COOLANT PUMP | ||
| Engine Mechanical | |||
| 2.0L | |||
| Compression | COMPRESSION TEST
for CBFA & CCTA engines COMPRESSION, CHECKING for BPY engines |
||
| Oil Pressure | At 2000 RPM and oil temperature of 80°C: at least 2.7-4.5 Bar Above 2000 RPM: Maximum 7.0 Bar |
||
| Overhaul | 15 CYLINDER HEAD, VALVETRAIN
for CBFA & CCTA engines 15 CYLINDER HEAD, VALVETRAIN for BPY engines 13 CRANKSHAFT, CYLINDER BLOCK for CBFA & CCTA engines 13 CRANKSHAFT, CYLINDER BLOCK for BPY engines |
||
| Torque | See Appropriate Procedure | ||
| 2.5L | |||
| Compression | COMPRESSION PRESSURE, CHECKING | ||
| Oil Pressure | At 2000 RPM and oil temperature of 80°C: 2.7-4.5 Bar Above 2000 RPM: Maximum 7.0 Bar |
||
| Overhaul | 15 CYLINDER HEAD, VALVETRAIN 13 CRANKSHAFT, CYLINDER BLOCK |
||
| Torque | See Appropriate Procedure | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate Torque | 60 Nm + 90° | ||
| Fuel System | |||
| Pressure Specification | |||
| 2.0L | 3.5-5.0 Bar | ||
| 2.5L | 4.0 Bar | ||
| Fuel Pressure Test Procedure | |||
| 2.0L | FUEL PRESSURE, CHECKING
for BPY engines as of 05.2006 FUEL PRESSURE, CHECKING for BPY engines as of 12.2010 FUEL PRESSURE, CHECKING for CBFA & CCTA engines |
||
| 2.5L | FUEL PRESSURE REGULATOR AND HOLDING PRESSURE | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.0L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 2.5L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | Coil-On-Plug | ||
| Ignition Wires (Routing) | Coil-On-Plug | ||
| Spark Plug | |||
| 2.0L | SPARK PLUG TEST DATA
for BPY (As Of 05.2006) SPARK PLUG TECHNICAL DATA for BPY (As Of 12.2010) TEST DATA AND SPARK PLUGS for CBFA & CCTA |
||
| 2.5L | TEST DATA AND SPARK PLUGS for BGP, BQP, CBTA & CBUA engines | ||
| Starting | |||
| Starter | N/A | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||