Control module and output signals

DTC	Error Message	Diagnostic Procedure	Malfunction Criteria and Threshold Value	Secondary Parameters with Enable Conditions	Monitoring Time Length	Frequency of checks, MIL Illumination
U0001	High Speed CAN Communication Bus	-- Refer to CAN-BUS TERMINAL RESISTANCE, CHECKING .	Short to battery plus Short to ground Core connection	-	0.5 Seconds	Continuous 2 DCY
U0101	Lost Communication with TCM	-- Refer to DSG MECHATRONIC J743 CAN-BUS TERMINAL RESISTANCE, CHECKING .	Not active, >5 Sec.	-	2 Seconds	Continuous 2 DCY
U0155	Lost Communication With Instrument Panel Cluster (IPC) Control Module	-- Refer to CAN-BUS TERMINAL RESISTANCE, CHECKING .	Unexpected or no information	-	0.5 Seconds	Continuous 2 DCY
U0302	Software Incompatibility With Transmission Control Module	-- Replace the Direct Shift Gearbox (DSG) Mechatronic -J743-. Refer to DSG Transmission Mechatronic -J743-, TRANSMISSION INSTALLED .	MT vehicle ECM received TCM signal AT vehicle ECM coded as MT vehicle	-	2 Seconds	Continuous 2 DCY
U0402	Invalid Data Received From TCM	-- Refer to DSG MECHATRONIC J743 CAN-BUS TERMINAL RESISTANCE, CHECKING .	Invalid information	-	2 Seconds	Continuous 2 DCY