Function 08 - Reading Measured Value Block

Function 08 - Reading Measured Value Block

Note:
^ All functions which could previously be performed with Scan Tool VAG1551 can also be performed with the Vehicle Diagnostic Testing and Information System VAS5051.

The control module can transfer a considerable amount of test data. This test data delivers information on the operational condition of the system and/or sensors connected to it. In many cases the data supplied aids the technician in both troubleshooting and corrective action. Because all the information cannot be evaluated at the same time, the test data has been summarized into single display groups, containing information which can be selected using display group numbers.

- Connect Scan Tool VAG1551 and insert "Brake Electronics" address word 03 with ignition switched on.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 8 to select "Read Measuring Value Block" function 08.

Indicated on display

Rapid data transfer Q
08 - Read Measuring Value Block

- Press Q button to confirm input.

Indicated on display

Read Measuring Value Block
Input display group number XXX

- Input display group number.