Testing if display is approx. - 40.0°C:
-- Disconnect the Engine Coolant Temperature (ECT) Sensor -G62- electrical harness connector -1-.
-- Using a jumper wire, connect the Engine Coolant Temperature (ECT) Sensor -G62- electrical harness connector terminals 1 to 2.
-- Check the value indicated on the scan tool display.
If the value jumps to approx. 140.0°C
-- Switch the ignition Off.
-- Replace the Engine Coolant Temperature (ECT) Sensor - G62-.
If indication remains at approx. -40.0°C: