OBDMID 162 ($A2): Combustion Misfire Cylinder 1 Data
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored".
Select "OBDMID 162 ($A2)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test ID (Hex-ID | DTC | Component or System | Min./Max. Values | Additional Information | |
|---|---|---|---|---|---|
| 11 ($0B) | P0301 | Misfire cylinder 1 average number of misfire detected during last 10 driving cycle. | 0 - 65535 (counts) | Refer to DTC P0301 in the OBD DTC Summary Table for all monitoring values.SAE P0XXX DIAGNOSTIC TROUBLE CODES . | |
| 12 ($0C | P0301 | Misfire cylinder 1 during current driving cycle. | 0 - 65535 (counts) | Refer to DTC P0301 in the OBD DTC Summary Table for all monitoring values.SAE P0XXX DIAGNOSTIC TROUBLE CODES . | |
-- If any of components or systems fail to meet the specified values, refer to "Diagnostic Mode 03 - Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.
End of Diagnosis.