OBDMID Test-ID 61 ($3D): Tank Vent Valve - Function Check
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored".
Select "OBDMID 61 ($3D)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test ID (Hex-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 128 ($80) | P0441 | Purge Flow Monitor. | 0.33 | 2.0 | Refer to DTC P0441 in the OBD DTC Summary Table for all monitoring values.SAE P0XXX DIAGNOSTIC TROUBLE CODES . |
| 131 ($83) | P0441 | Purge Flow Monitor passive test. | 0.148 | 1 | Refer to DTC P0441 in the OBD DTC Summary Table for all monitoring values.SAE P0XXX DIAGNOSTIC TROUBLE CODES . |
| 134 ($86) | P0441 | Purge Flow Monitor. | -10 or 0.035 | -0.35 or 10 | Refer to DTC P0441 in the OBD DTC Summary Table for all monitoring values.SAE P0XXX DIAGNOSTIC TROUBLE CODES . |
-- If any of components or systems fail to meet the specified values, refer to "Diagnostic Mode 03 - Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.
End of Diagnosis.