Telephone Operating Electronics Control Module, Rabbit Sedan Through 05.06

Fig 1: Telephone Operating Electronics Control Module, Rabbit Sedan Through 05.06

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The telephone operating electronics control module is installed under the front right seat.

Removing

-- Switch off ignition, switch off all electrical consumers and remove ignition key.

-- Remove right front seat. Refer to Removal and Installation

-- Remove screws -arrows-, disconnect connectors -A- and remove bracket with antenna selection control module.

Fig 2: Antenna Selection Control Module Screws, Bracket And Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip sill trim and fold carpet back.

-- Fold both latches on plastic bracket in direction of -arrow- and remove telephone operating electronics control module.

Fig 3: Telephone Operating Electronics Control Module Latches

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release connector by pressing on catch spring -A- and swing bracket in direction of -arrow-.

Fig 4: Connector And Catch Spring

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release connector by pressing on catch spring -arrow- and remove connector.

Fig 5: Releasing Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

Install in reverse order of removal.