Steering Wheel

Special tools and workshop equipment required

Removing

-- Remove driver side airbag unit. Refer to Removal and Installation .

-- Disconnect spiral spring connector -1, 2-.

Fig 1: Identifying Removal/Installation Of Steering Wheel

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn steering wheel into center position (wheels in straight ahead position).

-- Remove bolt -3- and pull steering wheel off steering column.

Installing

-- Place the steering wheel on the steering column.

-- Center markings for steering wheel and steering column -arrows- must align.

Fig 2: Identifying Removal/Installation Of Steering Wheel

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Guide connector terminal for steering angle sensor -G85- into provided opening in steering wheel base.

-- Connect connector -1- to connector terminal -2- of steering angle sensor.

-- Secure steering wheel with bolt -3-.

Tightening Specifications

Component	Tightening Specifications
Steering wheel to steering column Always replace bolt.	30 Nm + 90° turn