Comfort System Central Control Module -J393-, Adapting

Special tools and workshop equipment required

The following functions can be adapted:

Activating and deactivating "single door opening". See item: 1
Activating or deactivating "automatic locking of all doors and rear lid at >15 km/h (9 mph)". See item: 1
Activating and deactivating "automatic unlocking when removing the ignition key". See item: 1
"Unlock return message via access/start authorization"
"Unlock return message via radio remote control"
"Unlock return message via key switch"
"Return message lock via access/start authorization"
"Return message for locking via radio remote control"
"Return message for locking via key switch"
"Return message for ATWS activated"
"Country selection for the intelligent alarm horn"
"Sensitivity of inclination sensor"
"Sensitivity of interior monitoring"
Activating and deactivating "battery monitoring (sounder)"
Activating and deactivating "comfort operation via radio-frequency remote control"
Activating and deactivating "anti-theft warning system - alarm delay when opening driver door"
Activating and deactivating "automatic rear lid locking at >7 Km/h (4 mph)"

On vehicles with "Highline" equipment, the function cannot be adapted using a vehicle diagnosis, testing and information system, rather only directly via steering column switch in instrument cluster via the "Basic setting, main menu, settings and comfort" functions.

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .

-- In Vehicle Diagnostic Tester, select operating mode "Guided Fault Finding".

-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence: