Towing Recognition Control Module -J345-

Special tools and workshop equipment required

Removing

-- Turn off the ignition and all electric consumers and remove the key.

-- Remove left side panel trim in luggage compartment. Refer to Removal and Installation .

-- Disengage connectors -2- and disconnect them from Towing Recognition Control Module.

Fig 1: Identifying Towing Recognition Control Module J345 Connectors And Mounting Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The number of connectors on the towing recognition control module can deviate from the illustration depending on the vehicle equipment.

-- Remove mounting bolts -1- and remove towing recognition control module with bracket out of vehicle.

-- Remove mounting bolts -arrows- and remove v from bracket.

Fig 2: Identifying Towing Recognition Control Module J345 Mounting Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

Install in reverse order of removal. Note the following:

NOTE:

After installing a new towing recognition control module, it must be coded. Refer to TOWING RECOGNITION CONTROL MODULE -J345-, CODING .