Cd Changer
Special tools and workshop equipment required
- Radio Removal Tool 3316
Removing
CD changer is installed under the foldable center armrest.
Before starting repair work, perform the following:
-- Switch off ignition, switch off all electrical consumers and remove ignition key.
-- Open foldable center armrest completely.
-- If necessary, remove CDs remaining in CD changer. Refer to the Owner's Manual.
-- Slide radio removal tools 3316 into slots designed for them on CD changer at left and right until they engage audibly.
-- Pull out CD changer using radio removal tools -arrows-.
-- Disengage harness connector at points designated with -arrows- and disconnect it.
-- Press on retaining clamp -arrow- and pull out radio removal tools from removed unit.
Installing
Install in reverse order of removal.