April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

Component	Bolt Size	Nm
ABS Control Module¹	-	5.5
ABS Control Module (ABS Mark 60, from Calendar Week 22.2008)¹	-	2 + 0.8
ABS wheel speed sensor	-	8
Bracket for ABS Hydraulic Unit	-	8
Bracket for Heat Shield (ABS Mark 60, from Calendar Week 22.2008)	-	20
Brake Master Cylinder, Nut¹	-	25
Heat Shield¹	-	25
Heat Shield (ABS Mark 60, from Calendar Week 22.2008)	-	8
¹ Always replace

ABS Mark 70 (ABS/ASR)

Tightening specifications:
Control module to ABS hydraulic unit Use new bolts!	5.5 Nm
Hydraulic unit hex bolt to bracket	8 Nm
Brake lines at ABS aggregate:
Thread M 10 x 1	14 Nm
Thread M 12 x 1	14 Nm

ABS Mark 60, ABS, EDL, ASR and ESP, through Calendar Week 22.2008

Tightening specifications:
Control module to ABS hydraulic unit Use new bolts!	5.5 Nm
Hydraulic unit hex bolt to bracket	8 Nm
Brake lines at ABS aggregate:
Thread M 10 x 1	14 Nm
Thread M 12 x 1	14 Nm

ABS Mark 60, ABS, EDL, ASR and ESP, from Calendar Week 22.2008

Tightening specifications:
Control module to ABS hydraulic unit Use new bolts!	2 Nm + 0.8 Nm
Torx bolt for the hydraulic unit to the retainer	8 Nm
Hex bolt, retainer to bracket	8 Nm
Brake lines at ABS aggregate:
Thread M 10 x 1	14 Nm
Thread M 12 x 1	14 Nm