Rear Axle Camber, Adjusting

Rear Axle Camber, Adjusting

Special tools, testers and auxiliary items required

• Insert tool (T10179)

• Torque wrench (V.A.G 1332)

- Loosen nut - A - of threaded connection of upper transverse link at subframe.





- Adjust camber by turning hex of eccentric bolt - arrow -.

• The maximum adjustment range is 90° to left or right of center position.

- Tighten nut - A -.





- To do so, use (T10179).





When using (T10179), tighten nut to 80 Nm.

- After tightening the nut - A -, (Fig. N44-10035), check the camber value once again.

Tightening Specifications