Cable Router In Engine Compartment

Fuse Panel and Relay Carrier

CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to => [ Battery A, Disconnecting and Connecting ] Battery A, Disconnecting and Connecting.

Cable Router in Engine Compartment

CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to => [ Battery A, Disconnecting and Connecting ] Battery A, Disconnecting and Connecting.

Removing

- Remove battery (A). Refer to => [ Battery A ] Removal and Replacement.

• Air Filter, Removing and Installing

- Disconnect the connectors and the hose connections on the air filter housing.

- Remove the screws - arrows - and then remove the battery tray.





- Unclip the cable router cover at the tabs - arrows - and fold the cover in the direction of travel.





- Unclip the remaining tabs - arrows - and remove the cover.





- Disconnect all necessary connectors and remove the wiring harness from the cable router.

- Unclip the cable router completely and remove it.

Installing

Install in reverse order of removal, noting the following:

- Tighten the battery tray screws to 6 Nm.