Sae U0XXX DTCS
Control module and output signals
| DTC | Error Message | Diagnostic Procedure | Malfunction Criteria and Threshold Value | Secondary Parameters with Enable Conditions | Monitoring Time Length | Frequency of checks, MIL Illumination |
|---|---|---|---|---|---|---|
| U0001 | High Speed CAN Communication Bus | -- Check the CAN-Bus terminal resistance. Refer to CAN-BUS TERMINAL RESISTANCE, CHECKING . | Short to Battery + Short to Ground (GND), Core Connection | --- | 0.5 seconds |
|
| U0101 | Communication with TCM | -- Check the CAN-Bus terminal resistance, Refer to TRANSMISSION CONTROL MODULE CAN-BUS TERMINAL RESISTANCE, CHECKING . | Not Active, >5 seconds | - | 2 seconds |
|
| U0155 | Comparison of expected and received information from instrument cluster | -- Check the CAN-Bus terminal resistance. Refer to CAN-BUS TERMINAL RESISTANCE, CHECKING . | No or unexpected information | --- | 0.5 seconds |
|
| U0302 | Software Incompatibility with Transmission Control Module | -- Check the CAN-Bus terminal resistance, Refer to TRANSMISSION CONTROL MODULE CAN-BUS TERMINAL RESISTANCE, CHECKING . | AT vehicle ECM coded as MT vehicle | - | 2 seconds |
|
| U0402 | Invalid Data Received from Transmission Control Module | -- Check the CAN-Bus terminal resistance, Refer to TRANSMISSION CONTROL MODULE CAN-BUS TERMINAL RESISTANCE, CHECKING . | Invalid Information | --- | 2 seconds |
|