Engine Control Module: Application and ID

Fuel Injection System

For all Motronic fuel injection system component locations.

For all Motronic fuel injection system removal/installation procedures and torque specifications.

Check the Technical Bulletins for information that may supersede any information included in this information.

• All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through..

• Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.

• The manufacturers test box Adapter Cable (121 Pin) (VAG1598/31) is available for purchase or rental..

Technical Data