LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2007 >> Jetta GLI, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (3.2L VR6 4V Engine Mechanical, Fuel Injection Ignition, Engine Code(S): BJS) >> 13 - Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Engine, disassembling and assembling
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine, disassembling and assembling

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When performing repair work, secure engine to engine and transmission holder VAS 6095 or holding fixture VW 540 with supplementary set VW 540/1 B.

Part I and II, assembly overview, refer to Part I and II, assembly overview 

Part I: Chain drive, assembly overview, refer to Part I: Chain drive, assembly overview  

Part II: Crank drive, assembly overview, refer to part II: Crank drive, assembly overview  

Removing and installing ribbed belt, refer to Ribbed belt, removing and installing   under Ribbed belt, removing and installing 

NOTE:
  • If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication for a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:
  • Carefully clean oil passages
  • Replace oil injection jets
  • Replace oil cooler
  • Replace oil filter
scientia non olet · About LEMON Manuals