Sound System Amplifier
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volkswagen Rabbit, 2009 Volkswagen GTI, 2008 Volkswagen Rabbit, 2008 Volkswagen R32, and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Removing
Before starting repair work, perform the following:
-- Switch off ignition, switch off all electrical consumers and remove ignition key.
Amplifier is installed under front left seat.
-- Move seat into uppermost and rearmost position.
-- Unclip cover -arrow- on seat at bottom.
-- Remove screws -arrows- on amplifier.
-- Remove amplifier until you come to amplifier connectors.
-- Disengage connectors at amplifier -arrows- and remove them.
-- Remove amplifier.
Installing
-- Make sure that the amplifier slides into the notch on the bracket correctly when installing.
Remaining installation in reverse order of removal.