Antenna Selection Control Module

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volkswagen Rabbit, 2009 Volkswagen GTI, 2008 Volkswagen Rabbit, 2008 Volkswagen R32, and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Switch off ignition, switch off all electrical consumers, and remove ignition key.

-- Slide right front seat into the rearmost position.

-- Remove cover under seat in direction of - arrow-.

Fig 1: Identifying Cover At Bottom Of Seat

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release and disconnect electrical connection -A-.

Fig 2: Antenna Selection Control Module Connector And Clips

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove clips -arrows- and remove control module.

Fig 3: Antenna Selection Control Module Connector And Clips

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

Install in reverse order of removal.