Climatic Heating And A/C Unit: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volkswagen Rabbit, 2009 Volkswagen GTI, 2008 Volkswagen Rabbit, 2008 Volkswagen R32, and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- Temperature Regulator Door Motor -V68-
- Checking, use Vehicle Diagnosis, Testing and Information System VAS 5051B.
- Removing and installing, refer to TEMPERATURE REGULATOR DOOR MOTOR -V68- .
- Replacing, initiate Basic Setting function with Vehicle Diagnosis, Testing and Information System VAS 5051B. Refer to CLIMATRONIC, CHECKING AND ADJUSTING COMPONENTS .
- Bracket
- Screws
- Bolts must be unscrewed to separate air distributor and evaporator housing.
- Cover
- Recirculation Door Motor -V113-
- Checking, use Vehicle Diagnosis, Testing and Information System VAS 5051B.
- Removing and installing, refer to RECIRCULATION DOOR MOTOR -V113- .
- Replacing, initiate Basic Setting function with Vehicle Diagnosis, Testing and Information System VAS 5051B. Refer to CLIMATRONIC, CHECKING AND ADJUSTING COMPONENTS .
- Housing For Air Entry
- With recirculating air door.
- Evaporator Housing Upper Section
- Disassembling and assembling evaporator housing. Refer to EVAPORATOR HOUSING OVERVIEW .
- Evaporator Housing Lower Section
- Disassembling and assembling evaporator housing. Refer to EVAPORATOR HOUSING OVERVIEW .
- Evaporator
- Removing and installing, refer to EVAPORATOR .
- Evaporator Temperature Sensor -G308- or Evaporator Vent Temperature Sensor -G263-
- Checking, use Vehicle Diagnosis, Testing and Information System VAS 5051B.NOTE:
One or both of the component designations will appear, depending on software. The tasks are the same.
- Removing and installing, refer to EVAPORATOR TEMPERATURE SENSOR -G308- OR EVAPORATOR VENT TEMPERATURE SENSOR -G263- .
- Checking, use Vehicle Diagnosis, Testing and Information System VAS 5051B.
- Connection For Glove Compartment Cooling
- For disassembly, the glove compartment must be removed. Refer to Removal and Installation .
- Installation position of glove compartment cooling connection, refer to Installation position of glove compartment cooling connection .
- Coolant Hose For Glove Compartment Cooling
- For disassembly, the glove compartment must be removed. Refer to Removal and Installation .
- Fresh Air Blower Series Resistor With Fuse -N24-
- Removing and Installing, refer to FRESH AIR BLOWER SERIES RESISTOR WITH FUSE -N24- .
- Fresh Air Blower -V2-
- Removing and Installing, refer to FRESH AIR BLOWER -V2- .
- Dust and Pollen Filter
- With activated charcoal filter.
- Removing and Installing, refer to DUST AND POLLEN FILTER .
- Cover
- For dust and pollen filter.
- Heater Core
- Removing and installing, refer to HEATER CORE .
- Heater Core Trim
- Auxiliary Heater Heating Element -Z35-
- Only on vehicles with Diesel engine.
- Junction Box