Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions: Notes

Diagnostic Mode 06 displays the test results of emission related components and systems which are not continuously monitored.

The values of the individual test results must reach the specified value or must be within the min. and max. limits.

Depending on scan tool and protocol used, the information displayed in diagnostic mode 06 may be referred to by different names such as Test-ID (TID), Hex-ID, Component-ID (CID), On-Board Diagnostic Monitor Identifier (OBDMID), or contain no name at all and be referenced by only a number.

Test requirements 

• Exhaust system must be properly sealed between the catalytic converter and the cylinder heads.
• No DTCs stored in the DTC memory.
• Coolant temperature at least 80° C.

Work procedure 

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

-- Select the desired "Test-ID" of the component or system that is to be monitored, e.g. "Test-ID 01: Oxygen Sensor Monitor Bank 1 - Sensor 1".

-- Select the desired "Test-ID".

The current minimum and maximum values will be displayed on the scan tool screen.

The following table is a numerical list of all "Test-IDs" or "Hex-IDs" that may be selected.

Test-ID (Hex-ID)	Component or System
01 ($01): Test-ID 01 ($01): Oxygen Sensor Monitor Bank 1 - Sensor 1	Oxygen Sensor Monitor Bank 1 - Sensor 1
02 ($02): Test-ID 02 ($02): Oxygen Sensor Monitor Bank 1- Sensor 2	Oxygen Sensor Monitor Bank 1 - Sensor 2
33 ($21): Test-ID 33 ($21): Catalytic Converter Monitoring	Catalytic Converter Monitoring
58 ($3A): Test-ID 58 ($3A): Fuel Tank EVAP System Integrity/Leak Test (0.90")	Fuel Tank EVAP System Integrity/Leak Test (0.90")
59 ($3B): Test-ID 59 ($3B): Fuel Tank EVAP System Integrity/Leak Test (0.40/1.0mm)	Fuel Tank EVAP System Integrity/Leak Test (0.40/1.0mm)
60 ($3C): Test-ID 60 ($3C): Fuel Tank EVAP System Integrity/Leak Test (0.20/0.5mm)	Fuel Tank EVAP System Integrity/Leak Test (0.20/0.5mm)
61 ($3D): Test-ID 61 ($3D): EVAP Valve Function Check	EVAP Valve Function Check
65 ($41): Test-ID 65 ($41): Oxygen Sensor Heater Monitor Bank 1 - Sensor 1	Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
66 ($42): Test-ID 66 ($42): Oxygen Sensor Heater Monitor Bank 1 - Sensor 2	Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
162 ($A2): Test-ID 162 ($A2): Misfire Cylinder 1 Data	Misfire Cylinder 1 Data
163 ($A3): Test-ID 163 ($A3): Misfire Cylinder 2 Data	Misfire Cylinder 2 Data
164 ($A4): Test-ID 164 ($A4): Misfire Cylinder 3 Data	Misfire Cylinder 3 Data
165 ($A5): Test-ID 165 ($A5): Misfire Cylinder 4 Data	Misfire Cylinder 4 Data