Comfort System Central Control Module J393, dapting

The following functions can be adapted (depending on vehicle equipment):

• Activating and deactivating "single door opening"
• Activating and deactivating "automatic locking at >15 Km/h"
• Activating and deactivating "automatic unlocking when removing ignition key"
• Activating and deactivating "country setting for intelligent alarm horn"

• Activating and deactivating "battery monitoring (sounder)"
• Activating and deactivating "comfort operation via radio-frequency remote control"
• Activating and deactivating "anti-theft warning system - alarm delay when opening driver door"

• Connect Vehicle Diagnosis, Testing and Information System VAS 5051/5052 → VAS 5051 / 5052  under Vehicle Diagnostic, Testing and Information System VAS 5051 / 5052, onnecting .
• Select operating mode "Guided Fault Finding"
• Enter information as prompted and press ">" to confirm.

After the DTC memory of all control modules has been checked:

• Use "Go to" button to select "Function / Component Selection"
• Select "Body (Repair Group 01; 27; 50-97)"
• Select "Repair work int/ext (Repair Group 01; from 55 to 77)"
• Select "01 - Self-diagnosis"

• Select "46 - Central module comfort system"
• Select "Functions"
• Select "Adaptation"
• Press ">" to confirm.

• Follow tester prompts