Diagnostic scan tool, connecting
Special tools, testers and auxiliary items required
- Vehicle Diagnosis, Testing and Information System VAS 5051A
- or Vehicle Diagnosis, Testing and Information System VAS 5052
- Diagnostic cable VAS 5051/6A
- Perform the following work sequence.
- Apply parking brake.
- Automatic transmission: Set selector lever in position "P" or "N".
- Manual transmission: Gear stick in neutral.
Connect the Vehicle Diagnosis, Testing, and Information System VAS 5051A with the ignition off as follows:
Fig 3: Vehicle Diagnosis, Testing And Information System VAS 5051A Connected Using The Diagnostic Cable VAS 5051/6A
- Open the cover - 1 - for the diagnostic connector above the ashtray.
- Connect Vehicle Diagnosis, Testing and Information System VAS 5051A using the Diagnostic cable VAS 5051/6A with ignition switched off.
- Switch ignition on
Indicated on display:
- Press button/field for " Guided Fault Finding or Guided Functions on screen.
- Select one after another:
- Brand
- Model
- Model year
- Version
- Engine Code
- Confirm data entered.
NOTE:
- Wait until tester has checked all control modules in vehicle.
- Press "Go to" button and select "Function/component selection" function
Now follow information given on screen to start the desired functions.