LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2007 >> Golf Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (1.8L - Ignition/Glow Plug System - AWD, AWP, AWW Generic (A4 Platform)) >> Ignition/Glow Plug System >> Ignition, servicing >> Parts of the ignition, removing and installing (Vehicles with engine code AWP, AWW)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parts of the ignition, removing and installing (Vehicles with engine code AWP, AWW)

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, and 2004 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

The following list pertains to Fig 1.

  1. Connector 
    • Black, 4-pin
  2. Ignition coil with power output stage (Ignition Coil 1 with Power Output Stage -N70-, Ignition Coil 2 with Power Output Stage -N127-, Ignition Coil 3 with Power Output Stage - N291-, Ignition Coil 4 with Power Output Stage -N292-) 
  3. Snap ring 
    • for ignition coil with power output stage (Ignition Coil 1 with Power Output Stage -N70-, Ignition Coil 2 with Power Output Stage -N127-, Ignition Coil 3 with Power Output Stage -N291-, Ignition Coil 4 with Power Output Stage -N292-)
  4. Spark plug, 30 Nm 
  5. Connector 
    • black, 3-pin
    • Terminals of sensor and connector are gold-plated
  6. 10 Nm 
  7. Camshaft Position (CMP) Sensor - G40-* 
  8. 25 Nm 
  9. Washer 
    • Conical
  10. Face plate 
    • For Camshaft Position (CMP) Sensor 2 -G163-
    • note position when installing
  11. 20 Nm 
    • Tightening torque affects function of Knock Sensor (KS)
  12. Knock Sensor (KS) 1 -G61-* 
    • Terminals of sensor and connector are gold-plated
    • Component location: Cylinder block, intake side
    • Checking, see CHECK KNOCK SENSORS 
  13. Knock Sensor (KS) 2 -G66-* 
    • Terminals of sensor and connector are gold-plated
    • Component location: Cylinder block, intake side
    • Checking, see CHECK KNOCK SENSORS 
  14. Connector 
    • 2-pin
    • Terminals are gold-plated
    • Black for Knock Sensor (KS) 1 -G61-
    • Black for Knock Sensor (KS) 2 -G66-
    • Mark connector before removing
  15. Ground (GND) wire 
    • Do not loosen or tighten unless ignition is switched off.
  16. 10 Nm 
    • Do not loosen or tighten unless ignition is switched off.
  17. Fig 1: Ignition System Components With Torque Specifications (Vehicles With Engine Code AWP, AWW)
    G03459160Courtesy of VOLKSWAGEN OF AMERICA, INC.