Ignition system components, removing and installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Volkswagen Jetta, 2001 Volkswagen Golf, 2001 Volkswagen GTI, 2000 Volkswagen Jetta, and 2000 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
The following list pertains to Fig 1.
- Connector
- Black, 4 pin
- 10 Nm
- Ignition coil with output stage -N70-,-N127-, -N291-, -N292-
- Checking, see IGNITION COILS WITH OUTPUT STAGE, CHECKING
- Spark plug, 30 Nm
- Remove and install with 3122B Type and electrode gap, see TEST DATA, SPARK PLUGS
- 3-pin connector
- Contacts gold plated
- Brown for Knock sensor (KS) 1 -G61-
- Black for Knock sensor (KS) 2 -G66-
- 20 Nm
- Tightening torque influences the function of the knock sensor
- Knock sensor (KS) 1 -G61-*
- Sensor and connector contacts are gold-plated
- Checking, see KNOCK SENSORS, CHECKING
- Knock sensor (KS) 2 -G66-*
- Sensor and connector contacts are gold-plated
- Checking, see KNOCK SENSORS, CHECKING
- Connector
- Black, 3-pin
- 10 Nm
- Camshaft Position (CMP) sensor 2 - G163-*
- Checking, see CAMSHAFT POSITION (CMP) SENSOR 2 - G163-, CHECKING
- 25 Nm
- Washer
- Conical
- Hood
- For Camshaft Position (CMP) sensor 2 -G163-
- When installing note fixing arrangement
- Ground wire
- Only loosen or tighten with ignition switched off
- 10 Nm
- Only loosen or tighten with ignition switched off