Locking Cable, Removing And Installing: Removing: Notes
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Installation position of locking cable
- 1 - Footwell vent
- 2- Instrument panel support
- 3 - Heater
- First check whether a coded radio is installed. If so, obtain anti-theft code.
- Disconnect battery Ground (GND) strap. Refer to 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL .
- Remove driver side airbag unit and steering wheel. Refer to 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS .
- Remove left trim beneath dash panel. Refer to 68 - INTERIOR EQUIPMENT .
- Remove steering column trim. Refer to 70 - INTERIOR TRIM .
- Remove handle for adjusting reach and height of steering column.
- Turn ignition key to ignition on position.
- Move selector lever to "P" position.