Control Module, Removing From Hydraulic Unit

-- Set hydraulic unit with control module upward onto a clean, level surface.

-- Remove inner Torx® bolts -arrows-.

Fig 1: Locating Control Module Torx Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Pull control module off from hydraulic unit -arrow- without angling.

Fig 2: Identifying Control Module Pulled Off From Hydraulic Unit Without Angling

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Carefully pull off all sealing rings from valve domes of hydraulic unit.

-- Cover control module magnetic coils with a lint free cloth.

After separating the control module and hydraulic unit, use transport protection for valve body.