Test-ID 61 ($3D): EVAP Valve Function Check
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored".
Select "Test-ID 61 ($3D)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 128 ($80) | P0441 | Function check. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 30% | 0.01 | Refer to DTC P0441 in the DTC summary table. SAE P0XXX DIAGNOSTIC TROUBLE CODES P0441 . |
| 130 ($82) | - | Active test: deviation of oxygen sensor regulator in lean direction. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 0.06 | - | - |
| 130 ($82) | - | Active test: deviation of oxygen sensor regulator in rich direction. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | - | 0.06 | - |
-- If any of components or systems fail to meet the specified values. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.
End diagnosis.