ATF Cooler, Rectangular Version: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to AUTOMATIC TRANSMISSION FLUID COOLER OVERVIEW .

Install in reverse order of removal. Note the following:

NOTE:

Always replace O-rings.

-- Install the catalytic converter. Refer to [For engine(s) CBTA,CBUA] Removal and Installation [For engine(s) CVCA] Removal and Installation [For engine(s) CPRA,CPKA] Removal and Installation .

-- Install the coolant hoses to the ATF cooler according the markings made during the removal.

-- Check the coolant level. Refer to [For engine(s) CPRA,CPKA] General Information [For engine(s) CBTA,CBUA] General Information [For engine(s) CVCA] General Information .

-- Install the battery tray and the battery. Refer to [For engine(s) CVCA,CDVB,CPRA,CBTA,CPKA,CKRA,CBUA] Removal and Installation .

-- Check the ATF level. Refer to AUTOMATIC TRANSMISSION FLUID LEVEL, CHECKING AND ADDING .

-- Install the engine cover and the air filter. Refer to [For engine(s) CPRA,CPKA] Removal and Installation [For engine(s) CBTA,CBUA] Removal and Installation .