Selector Lever Cable, Adjusting: Notes
WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench (5-50 Nm) VAG1331
The Selector Lever Cable must Always Be Adjusted If:
- The selector lever cable was removed from the transmission.
- The engine and/or transmission were removed and installed.
- Parts of engine/transmission mounts were removed and installed.
- The cable itself or the selector mechanism was removed and installed.
- Engine/transmission position changes, for example, were installed free of tension.