LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2007 >> Eos 3.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Communication) >> 91 Communication >> Removal And Installation >> External Audio Source Connection, Removal And Installation >> External Multimedia Device Interface -R215-, REMOVAL AND INSTALLATION >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

External Multimedia Device Interface -R215-, REMOVAL AND INSTALLATION: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

From 06/2013 the Cell Phone Operating Electronics Control Module -J412- is integrated in the External Multimedia Device Interface -R215-.

Analog audio (via the AUX IN input) and digital audio (via the USB or iPod input) can be played on the Radio/RNS -RX1- via the External Multimedia Device Interface -R125-. Devices that are connected digitally can be operated through the Radio/RNS -RX1-. ID3 tags and titles are also displayed in the Radio/RNS -RX1- display.

NOTE:

Since the capability to display the ID3 tags and titles on the Radio/RNS -RX1- display depends on the quality of the audio files being use, refer to the Owner's Manual and appropriate Wiring Diagram. for the Radio/RNS -RX1- as well as to the Owner's Manual for the MP3 player or the iPod.

The External Multimedia Device Interface -R215- provides an audio input (AUX-IN), a USB input and an iPod connection (supply, signal and audio-in) as an interface. A specific adapter cable is used to connect the mobile device to the USB or iPod interface on the External Multimedia Device Interface -R215-. The USB or iPod connection can be used to charge a mobile device.

NOTE:

Familiarity with the function and operation is needed if there are customer concerns.

For additional information, refer to the Owner's Manual and appropriate Wiring Diagram.

Use the Vehicle Diagnostic Tester for Servicing or Troubleshooting.

Check all vehicle equipment (clock, convenience systems, etc.) after connecting the battery, refer to [For transmission(s) 0A4, 02E, 09G, 02Q] [For engine(s) CVCA, CDVB, CPRA, CBTA, CPKA, CKRA, CBUA] Removal and Installation and/or the Owner's Manual.