LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2007 >> Eos 3.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (3.6L - Ignition System - Engine Code: CDVB) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Engine Speed Sensor -G28- >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Speed Sensor -G28-: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to Description and Operation .

-- Disconnect the connector from the engine speed sensor and free up the cable.

-- Remove the bolt -2- and then turn the engine speed sensor -1- and remove it.

Fig 1: Identifying Bolt And Engine Speed Sensor
GWWN24-10748Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals