LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2007 >> Eos 3.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (2.0L - Ignition/Glow Plug System - Engine Code(S): CKRA) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Automatic Glow Time Control Module -J179- >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Glow Time Control Module -J179-: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Automatic Glow Time Control Module
GWWN28-10112Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Arrow -

Automatic Glow Time Control Module -J179-

The pre-glow system is controlled by the automatic glow time control module -J179-. The Automatic Glow Time Control Module -J179- is On Board Diagnostic (OBD) capable.

If there is a malfunction in the pre-glow system, a fault will be stored in the Engine Control Module (ECM).

Checking the pre-glow system is explained in "Guided Fault Finding".

Electronically controlled glow plugs with a separate glow plug control module was installed in order to reach a quick starting function.

Each glow plug is controlled and diagnosed individually.