Safety Precautions
To reduce the risk of personal injury and/or damage to the fuel injection and ignition system, always observe the following:
- Do not touch or disconnect ignition coils with power output stages when the engine is running or turning at starting speed.
- The ignition must be turned off before connecting or disconnecting injection and ignition system wiring or tester cables.
- If engine is to be cranked at starting speed without starting:
-- Using the assembly tool -T10118-, disconnect the connectors from the ignition coils 1 through 6.
If special testing equipment is required during a road test, note the following:
- Test and measuring instruments must be secured to the rear seat and operated by a second person from this location.
If the vehicle is involved in a collision while testing and measuring equipment is operated from the front passenger seat, the person sitting in that seat could be seriously injured when the airbag deploys.