Digital Satellite Radio Tuner -R190-
Removal
Do the following before starting the procedure:
-- Turn off the ignition and all electric consumers and remove the key.
-- Slide right front seat into the rearmost position.
-- Unclip cover in -direction of arrow- at bottom of seat.
-- Remove the three bolts -arrows- on radio tuner.
-- Disconnect harness connectors -A and B- on digital satellite radio tuner, to do so press locking mechanisms -arrows- and then disconnect the connectors.
-- Disconnect antenna wires -C- on tuner, to do so press locking mechanisms -arrows- and then disconnect the connectors.
-- Remove digital satellite radio tuner.
Installation
Installation is performed in the reverse order of removal.